A cable wrap sensor protects a kicker motor or the boat whether the boat is trailered or moored.

CABLE WRAP SENSOR.

Included in this package.

One cable wrap module.
Two heat-shrink connectors.
One cable wrap.

Free USPS Priority Mail shipping in USA.

Two examples of the cable wrap sensor are shown below. One example is a boat that is tethered to the dock and the other is a kicker motor tethered to the boat. If the cable is cut or disconnected the alarm siren is triggered. This sensor is versatile because it can be used to tether the boat to the boat trailer or anything the cable can be threaded through.

CABLE WRAP SENSOR QUESTIONS?:

For answers use these links.

1. Why use Cable Wrap Sensors with a boat alarm?
2. How does it work?
3. Is it difficult to install?
4. View PDF File on How to Install Cable Wrap Sensors.
5. Recommended Wiring Procedure -- Model 411.

ANSWER TO QUESTION:

1. Why use Cable Wrap Sensors with a boat alarm?

Cable wrap sensors provide boat security by tethering the boat to the dock, by tethering the kicker motor to the boat, by tethering the lower unit to the boat, or by tethering the boat to the boat trailer. The cable wrap is very versatile and can be used with our boat alarm to protect any item that can be tethered to the boat.

Perimeter protection is provided by devices that discourage an intruder before he boards your boat. Cable Wrap sensors provide perimeter protection.

Return to Top

Following is an example of a cable wrap used with a kicker motor to prevent theft.

Return to Top

ANSWER TO QUESTION:

2. How do they work?

The cable wrap sensor consists of a module and a coaxial cable. The cable wrap module is mounted inside the boat. The coaxial cable connects to a cable module terminal and is then threaded through the dock, trailer wheel, or the trolling motor. The loose end of the coaxial cable returns and connects to the cable wrap module. The coaxial cable is wrapped so that it is necessary to cut or disconnect the cable in order to remove the item being protected. The cable wrap module has two wires which are connected to alarm zone 2. The cable wrap sensor is a normally-closed sensor so the alarm is triggered if the cable is cut or disconnected.

Return to Top

ANSWER TO QUESTION:

3. Is it difficult to install?

No. It is easily installed with ordinary hand tools. Refer to the installation manual for details.
Link to the Canvas Wrap Sensor Installation Manual

Return to Top

(Questions? Call Francis 406-249-0640) MST 8:00AM to 5:00PM